Does a pre-terminated cable have to be in the data center? MPO Pre-terminated Cable System Solutions

       Does pre-terminated cable have to be in the data center? MPO pre-terminated cable system solutions

　　Pre-terminated cables are not necessarily used in data centers, but can also be used in other places. Pre-terminated cables have the characteristics of high transmission rate, transmission safety, high bandwidth, high density, and easy construction, which can be applied to any comprehensive wiring project in weak current engineering.

　　The pre-terminated main fiber optic cable adopts small diameter OM3/OM4 fiber optic cable and 12-core MPO/MTP connector. The plug-and-play MPO/MTP pre-terminated fiber optic cable can be quickly deployed and easily connected to the plug-and-play module or MPO/MTP adapter panel. Customers can design according to the actual situation to achieve accurate wiring requirements. The pre-terminated fiber optic cable can effectively realize high-performance and high-density fiber optic system connection.

　　Applications: Data center infrastructure physical layer connection, LAN cabling backbone system, building and campus backbone connection.

　　The MPO pre-terminated fiber optic cable system solution consists of backbone fiber optic cable, backbone extension fiber optic cable, branch fiber optic cable, adapter module, adapter panel, straight panel rack, distribution box and jumper cable. The customized MPO pre-terminated fiber optic cable system is a high-density pre-connected fiber optic cable solution for data centers and other high-end fiber optic cabling applications. Modular and latch design greatly facilitates the installation and maintenance of construction personnel on site; universal system polarity and high-end connectors enable seamless connection between fiber optic cable and equipment, and ensure high flexibility, compatibility and reliability of the entire link.

　　Installation of the pre-terminated optical cable system: In the case of ensuring that the system polarity of the entire link is consistent, first install the hardware such as the distribution box and module box in place, and then lay the path and space of the pre-terminated trunk optical cable and branch jumper. After laying in place, the cable traction handle and protective cover at each end can be removed, and the connectors of the MPO and branch jumper can be plugged into the corresponding ports on the distribution frame, module and equipment respectively. Finally, the optical cable after wiring is fastened with cable management facilities such as buckles to make the wiring management more perfect, and the installation of the entire system link can be completed.