The reason why the right fiber cutting angle is wrong

　　The reasons for the wrong fiber cutting angle can involve multiple aspects. Here are some coMMon factors:

　　Equipment problems

　　Improper blade height: When using a fiber optic cutting knife, if the blade height is set too high, it may cause the cutting angle to be too large. At this time, it is necessary to adjust the height of the tool holder. The general adjustment method is detailed in the manual of the cutting knife, and tools such as a hexagonal wrench or a screwdriver are usually required.

　　Blade wear or edge is not sharp: After the blade is used for a long time, the edge may wear or become less sharp, which affects the accuracy of the cutting angle. At this time, the blade or edge needs to be replaced.

　　Loose equipment: such as loose or displaced large gland, loose foot pads and fixtures, etc., may affect the accuracy of the cutting angle. It is necessary to regularly check and adjust the tightness of these parts.

　　Operational issues

　　Improper operation: If the operator is not familiar with the fiber cutting process, or does not use the appropriate cutting Technology, it may lead to the wrong cutting angle. Therefore, the operator needs to receive professional training and be familiar with the operation process and precautions of the cutting equipment.

　　Improper Fiber Fixture: If the fiber is not fixed properly before cutting, or the fiber is not in a vertical state, it may also lead to the wrong cutting angle. Before cutting, it is necessary to ensure that the fiber is properly fixed and in a vertical state.

　　III. Environmental factors

　　Ambient temperature and humidity: The ambient temperature and humidity during operation may also have an impact on the cutting angle. For example, excessive temperatures may cause the blade to deform, thus affecting the accuracy of the cutting angle.

　　IV. Material issues

　　Fiber quality problems: If the fiber itself has quality problems, such as uneven surfaces or SMall particles of residue, it may also lead to wrong cutting angles. When choosing a fiber, it is necessary to ensure that the quality of the fiber meets relevant standards.

　　V. Other factors

　　Programming errors: In fiber laser cutting machining, if there are programming errors, the actual cutting angle may not match expectations. At this point, it is necessary to check and correct the programming errors.

　　Focus position error: The error of the focus position can also lead to errors during cutting. Many factors can change the relative position of the focus to the surface of the product, which will also affect the accuracy of the processed product.

　　To sum up, the reasons for the wrong angle of fiber cutting may involve equipment, operation, environment, materials and other aspects. In order to ensure the accuracy of fiber cutting, it is necessary to comprehensively consider these factors and take corresponding measures to prevent and improve.