Optical cable construction is a very important job. How to construct it in a standardized way? What are the technical requirements?Overview of communication optical cable engineering01Communication optical cable engineering is mainly divided into overhead optical cable engineering, direct buried opt

Pipeline Optical Cables① The optical cable in the hand hole should be protected by a serpentine hose (or soft plastic tube). The laid optical cable should be close to the wall of the hand hole and tied to the bracket with a plastic tie or processed according to the design requirements; at the same t

When using different optical cables for distributed optical fiber sensing, the following factors need to be considered in the selection:According to measurement requirementsStrain measurement: If high-precision strain measurement is required, optical fiber with polyimide (PI) coating can be selected

1.Briefly describe the composition of optical fiber? Answer: Optical fiber consists of two basic parts: the core and cladding, which are made of transparent optical material.   2. What are the basic parameters that describe the transmission characteristics of optical fiber lines? Answer: Including l

11.What is the backscattering method? A: The backscattering method is a method for measuring attenuation along the length of an optical fiber. Most of the optical power in the optical fiber propagates forward, but a small part is backscattered toward the light emitter. Using a spectrometer at the li

16. In current commercial optical fibers, which wavelength of light has the smallest dispersion? Which wavelength of light has the smallest loss? Answer: Light with a wavelength of 1310nm has the smallest dispersion, and light with a wavelength of 1550nm has the smallest loss. 17.How are optical fib

23.What does the armor of optical cable mean? A: It refers to the protective element (usually steel wire or steel belt) used in optical cables for special purposes (such as submarine optical cables, etc.). The armor is attached to the inner sheath of the optical cable. 24.What materials are used for

34. In fiber optic communication systems, the following items are commonly found. Please indicate their names. AFC, FC adapter ST adapter SC adapter FC/APC, FC/PC connector SC connector ST connector LC patch cord MU patch cord Single-mode or multi-mode patch cord 35.What is the insertion loss (or in

43.What is the nonlinearity of optical fiber? Answer: It means that when the input optical power exceeds a certain value, the refractive index of the optical fiber will be nonlinearly related to the optical power, and Raman scattering and Brillouin scattering will occur, causing the frequency of the

3. Absorption loss of materials The material used to make optical fibers can absorb light energy. After the particles in the optical fiber absorb light energy, they vibrate and generate heat, which dissipates the energy, thus generating absorption loss. We know that matter is composed of atoms and m